#MATROX DUAL HEAD 2 GO DIGITAL ME PATCH#
#MATROX DUAL HEAD 2 GO DIGITAL ME UPGRADE#
#MATROX DUAL HEAD 2 GO DIGITAL ME CODE#
#MATROX DUAL HEAD 2 GO DIGITAL ME MAC#

Both models output a maximum resolution of 3840x1200 across two displays РІР‚вЂњ thatРІР‚в„ўs 1920x1200 for each. But that - and the ability to connect two SE's together to provide four external displays - is pretty much where the differences end.Р”В«oth units feature a DisplayPort input and two DVI-D outputs, along with a powered USB port to supply power for the device РІР‚вЂњ although Matrox also sells a power adapter kit if thereРІР‚в„ўs no powered USB available on your system. While the SE connects to a systemРІР‚в„ўs DisplayPort video output, the ME connects via a computerРІР‚в„ўs Mini DisplayPort/Thunderbolt port. While both the SE and ME let users connect up to two monitors, the SE model features multi-GXM (Graphics eXpansion Module) support that allows two adapters to be connected to a single system to provide a total of up to four displays.Р”В«oth the ME and SE share the same palm-sized form-factor, albeit with a different finish РІР‚вЂњ black for the SE and, you guessed it, brushed aluminum for the ME.

#MATROX DUAL HEAD 2 GO DIGITAL ME CODE#

No idea what's going on there, didn't look at all the PLL code in detail.Р”В®DID data retrieval seems to work alright as well, btw.Matrox has updated its line of DualHead2Go external multi-display adapters with the simultaneous release of the DualHead2Go Digital SE and DualHead2Go Digital ME (Mac Edition). For a mode (DFP), the PMN values need to be 0x12/0x00/0x12. The second crtc uses the video pll on g550 it seems, which doesn't like the values we feed it currently. Inverting BiosOutputMode gives me a clone mode display, as expected. BiosOutputMode seems to be working correctly here. Does that make sense?Р”Р„nyway, I just got dual head working fine with a type a) card (without the HAL module).

I think the card with the LFH60 connector has two TMDSs, and the dual-vga cable just translates the digital signal to an analog one. I guess you're using the HAL module, since TMDS/DVI support is needed for all of these cards. Hint: This topic entered into Matrox forum:Р”Р„) g550 w/ one DVI connector, and one VGA connector O) 'startx /usr/kde/3.5/bin/startkde -layout TwinView'Р”Р„lias xtwms='startx /usr/bin/twm -layout SingleView'Р”Р„lias xtwmt='startx /usr/bin/twm -layout TwinView'Р”Р„lias xkdes='startx /usr/kde/3.5/bin/startkde -layout SingleView'Р”Р„lias xkdet='startx /usr/kde/3.5/bin/startkde -layout TwinView' Now, you see your shell cloned on both screens. O) 'startx /usr/bin/twm -layout SingleView'. O) Boot protocol will show up on the secondary screen. O) Connect your secondary monitor to the HD-15 Adapter. O) Connect your primary monitor to the HD-15/DVI-Adapter. To me, the most reliable work-around still seems to be the following: So I fell back to the clean unpatched x11-drivers/xf86-video-mga-1.2.1.3 code Then, after a power-down - wait - reboot, same symptoms again. layout TwinView' and afterwards closing KDE, thus re-entering ASCII / VGA mode, Interestingly enough, after the first 'startx /usr/kde/3.5/bin/startkde. No signal on the second connector (DVI -> HD15).

#MATROX DUAL HEAD 2 GO DIGITAL ME PATCH#

15, 2005).Р”Р‡irst, the patch worked absolutely fine for me.Р”Р„fter boot, there was only a signal on the HD15 connector, obviously being usedР”Р„s the main display. Nor did the 'newest' 1.5 BIOS (setup_258.exe, Sept.

Re-flashing did not yield any difference to me.

#MATROX DUAL HEAD 2 GO DIGITAL ME MAC#

This easy-to-use solution, at an MSRP of 179.00 USD, is the ideal multi-display adapter for any Mac user. xc/programs/Xserver/hw/xfree86/drivers/mga The DualHead2Go Digital ME, encased in a small, silver box connects to the Thunderbolt port or Mini DisplayPort video output of Mac notebooks or desktops and drives two external DVI displays each at a maximum resolution of 1920x1200. diff the Matrox source /mgadrivers-3.0-src/4.3.0/drivers/src against RESUMMEE: It seems pretty obvious that the real cause is hidden in /mga. Replacing mga by the Matrox supplied source code also works (only takes longer). This way, after finding out how, it's done in less than a minute. No need to modify /usr/X11R6/lib/modules/dri/mga_dri.so. Lrwxrwxrwx 1 root root 16 Oct 16 14:04 mga_drv.o -> mga_drv.o_MATROX Ln -s mga_drv.o_Matrox mga_drv.o # this way, switching back is easy :-) Mv mga_drv.o mga_drv.o_XORG # BackUp - just to be safe

Just only replacing the mga_drv.o by the current binary one supplied by Matrox

#MATROX DUAL HEAD 2 GO DIGITAL ME UPGRADE#

I am using a G550 and two Eizo F980 / T960 in TvinView configuration underР”В¬urrent linux-2.6.8-gentoo-r10 on a dual-processor-machine.Р”Р„fter the current upgrade to x11-base/xorg-x11_6.8.0-r1, I had similar problems.

Matrox dual head 2 go digital me